Vertical Shredder : are mainly applied in applications processing preshredded metal scrap from twin shaft shredding systems to produce required regular output material.
Shredwell VS series Vertical Shredder is aggressively size reduce and density pre-shredded material whilst liberating the various different fractions and allowing for better separations and reduced transport costs. The breakers in the upper part of the chamber smash the material until it is small enough to enter the gap between the milling rings and chamber liners. When the material enters the second stage the milling rings impact, grind and roll the material into clean fragments. When milled in to small enough pieces, the balled up material falls into the lower chamber. It is then ejected by the discharge paddle. The three above stages create a product which is both clean and of high bulk density suitable for transportation..
Typical Application Include:
Strong welded construction from heavy gauge, wear resistance steel plate.
·Integral, annealed and CNC bored two piece chamber for quick access and simplified maintenance.
·Durable, wear resistant, replaceable breakers, milling rings and chamber liners
·Oversized, spherical rotor bearings with seal protection–prevents bearing damage due to product migration
·Adjustable product size control
·Replaceable wear plates in the chamber
·Stand Alone Electrical Control Panel – using quality Schneider(Telemecanique) components and Siemens PLC’s
·Tested, Approved and Certified to the applicable CE safety standards.
Main features:
·Electronic Scrap – WEEE Directive Materials
·Aluminum – Castings, Profiles, UBC’s etc. ·Scrap Steel – Pre-shredded steel sheets, metal drums etc.
·ELV’s (End of Life Vehicles) – Pre-shredded vehicle bodies
·SLF (Shredder Light Fraction), ASR (Auto Shredder Residue)
Vertical Shredder | VS100 | VS300 | VS600 |
Motor | Siemens | Siemens | Siemens |
Power | 75 Kw | 130 Kw | 320 Kw |
Voltage | As per request | As per request | As per request |
EquipmentDimensions L/W/H | 3000*3300*4600 mm | 4000*3500*5300 mm | 4600*3200*6300 mm |
Chamber Height | 700 mm | 850 mm | 950 mm |
Rotor Diameter | φ1250 mm | φ1250 mm | φ1250 mm |
Equipment Weight | 8000 Kg | 13000 Kg | 18000 Kg |
Final Product | 50-100mm | 50-100mm | 50-100mm |
Capacity | 1000-2000 Kg/Hr | 3000-5000 Kg/Hr | 6000-8000 Kg/Hr |

- Reliable Power
- Lower power consumption
- Free of Maintenance
- Low noise
- Higher output capacity
- Siemen/ABB/WEG Motor
- Guomao or Tongli (China Top Brand) or SEW Reducer
- TWB Bearing or FAG/SKF Bearing
- Siemens PLC
- Schneider component
Successful Cases : Vertical-Secondary Metal Shredding Machine.
Shredwell metal recycling machines and recycling plants has been manufactured and installed all over the world..
2012-USA
VS-3000 Metal Vertical Shredder used as secondary metal shredding machine in metal recycling industry in USA…Read More